Installation and Setup

Installing A New Location
Introduction Restaurant IoT™ is a comprehensive solution for restaurant monitoring made up of the following components: Whisker.Block®...
Tue, 7 Apr, 2020 at 5:05 PM
Add/Edit Users
Adding and editing users in Whisker.io's portal  is a simple two-step process. Let's get started! The first thing to know is profiles in Whisk...
Thu, 16 Apr, 2020 at 11:45 AM
Change Default Alert Configuration
Modifying default alert metrics is an easy process with a little guidance. Always bear in mind, our default values are derived from FDA recommendations and ...
Mon, 13 Apr, 2020 at 2:40 PM
Enable Equipment Health Report
When Equipment Health Reports (EHR's) were originally released, the feature was enabled for everyone shortly after an emailed campaign was sent regardi...
Tue, 10 Mar, 2020 at 11:40 AM
FoodSafe.io™ Auto-populate FridgeTrak.io sensor data into your checklists
Do you have FoodSafe.io and FridgeTrak.io technologies, but dread having to stand in a walk-in cooler or freezer to get the temp with a digital thermometer?...
Wed, 12 Feb, 2020 at 7:46 PM
Enable FoodSafe.io Status Reports (Administrative)
When FoodSafe.io Status Reports (FSR's) were originally released, the feature was enabled for everyone shortly after an emailed campaign was sent regar...
Tue, 10 Mar, 2020 at 11:40 AM
Prep Timer: Configuring Your Zebra Printer (BLE) For Use
Zebra Printer Setup and Configuration NOTE: FoodSafe.io and iPad are only compatible with the Zebra ZD41022-D01W01EZ   On a PC, download and install...
Wed, 25 Mar, 2020 at 10:57 AM
Prep Timer: Synching Your iPad To The Zebra Printer
Syncing your iPad to the Zebra Printer Ensure your Zebra ZD-410 is powered on and configured. Next power on your iPad and browse to “configuration”. Tap...
Wed, 25 Mar, 2020 at 5:49 PM
Prep Timer: Supported Zebra Label Sizes
FoodSafe.io and your Zebra ZD-410 is only compatible with thermal-type 2" x 1" labels. These labels can be purchased almost anywhere online and co...
Wed, 25 Mar, 2020 at 1:24 PM
Provisioning a new Smart.Soap™ Location
Once you have ordered a Smart.Soap™ Starter Kit (buy here) for one or more locations, you need to create a whisker.io account (if you don't already h...
Fri, 1 May, 2020 at 1:25 PM