Do you have FoodSafe.io and FridgeTrak.io technologies, but dread having to stand in a walk-in cooler or freezer to get the temp with a digital thermometer? Your prayers have been answered! 

Whisker.io Portal's RIoT Administrative Dashboard allows you to configure checklists to automatically populate current sensor data for checklist steps when applicable. Now when this checklist steps occurs, you'll prompted to accept the sensor's temperature or you may decline the prompt and take the temperature manually.

Dependent on the kit(s) you purchased for your location(s), configuration will vary.

Let's say you have checklist called "Startup". This checklist has a series of steps possibly asking you to get the temperature for a walk-in fridge and/or freezer, prep-table, shake or sundae reservoir. Instead of having to take the digital thermometer and having to probe these appliances for temperature -you can link these these checklist steps to their assigned appliance sensor.

If you are already familiar with Whisker.io Portal's RIoT Administrative Dashboard and checklist management, the sample below should be enough for those use to configure their checklist with sensors accordingly.

If you are not familiar with Whisker.io Portal's RIoT Administrative Dashboard and checklist management, please watch the short video below on linking checklist steps with corresponding appliance sensors.